Roller shades are easy to install, in this short video you will learn how to install a standard Inside Mount Roller Shade.
Roller shades are easy to install, in this short video you will learn how to install a standard roller shade without a valance. For easiest installation, a cordless screwdriver, drill bits, and a pencil are all you will need. Before starting, carefully unpack your shades and mounting hardware. Check the printed instructions included with your product to familiarize yourself with the contents of your box.
Each end of roller shade will have its own mounting bracket, with the material hanging behind the roller, match each bracket to the appropriate end to determine which bracket to use on the left and right side of the window. Next, while holding your bracket in position, use your pencil to mark where your screws will go. For easiest installation, pre-drill your installation holes where marked. Install each bracket using 2 of the supplied mounting screws per bracket. Next, install the side of the shade with the retractable pin first. While pushing the retractable pin into the bracket, connect other side of the shade into the other bracket. To complete your installation, install the supplied safety clip to keep your cord fairly taught. Install the safety clip inside the window opening, however, if necessary the clip may also be installed on the wall outside of the window frame. Finally, test your shade by lowering and then raising it using the lift control. Your shade should operate smoothly within the window opening.
And that’s it! If you still have any questions about the installation of your shades just give us a call at 1-800-505-1905